The roof of the house is one part that is often missed during the home maintenance process. Sometimes it takes a precarious moment, just say the appearance of water seepage during the rainy season or translucent sunlight into the house due to perforated tile, to make us aware of the importance of routine inspection of the roof of the house. You can book the best inspection roof service at the roofer west palm beach.
How to check the feasibility of roof performance can be said to be simple. Here are 4 easy ways you can do yourself at home independently.
Look for water seepage on the wall
Checking can be started without having to go up on the roof. Inspect all walls in the house to look for signs or marks of water seepage from above. If you find it, it is most likely caused by a roof leak. Take action by checking the roof above the water seepage surface. Ideally for preventative measures, replace the tile in the section with a new one without thinking twice.
Use a water hose
Seepage is a serious problem but leakage is another thing that is no less annoying. Don’t wait for the rain to look for a roof zone that has potential (or is proven) to leak. Flush the water using hoses throughout the roof tile. You need one more person to monitor for leaks. This facilitates the checking process and reduces the zones that you need to take action. Save time, save energy!
Make sure that not even one tile is arranged with a different pattern
Both from below or from above, pay close attention to the composition of the tile that forms the roof of your home. Since each tile is generally uniform, it is relatively easy to detect tiles that are starting to fall apart and not match the pattern that was installed before. If you have this, take action or replace it with a new tile if the problem is the quality of the tile is deteriorating and has worn out.
Suspect roof tiles or zones on mossy roofs
This can also be done from observations from below although it’s also good to check from above. Look for a roof zone that is starting to moss. Most likely, the robustness of the tile was disturbed and become prone to porous. Cleanse if it is still within reasonable limits and replace if the parasite is to spread and looks severe.
Tap with the finger
Tap the tile on the roof zone that you can reach. If the sound made loud, the tile has a reasonably sturdy and safe to protect the house. Vice versa, you will know if the tile is weathered and not working optimally after you tap. Note: only use fingers or other non-hard objects. Objects that are too hard to knock will actually increase the risk of porous tile inside.
Check whether the waterproof paint on the tile starts to peel
This is the reason why you are generally advised to coat your tile with waterproof paint. In addition to providing double protection on the roof, this also makes it easier for you to check the feasibility of a house tile. See which part of the tile has or is starting to peel. The peeling part of the tile indicates that the roof is increasingly struggling with extreme weather changes, the slackness that begins to occur in it and generally indicates a decrease in its quality in forming a good roof.